Thermaltake Commander C31 TG Snow

Commander C31 TG Snow ARGB Edition

Mid-tower case with tempered glass side panel and two preinstalled 20cm 5V ARGB front fans and one 12cm standard rear fan, supporting up to ATX MB.

Commander C31 Snow

- Dual 200MM ARGB Fans Tempered Glass

- ATX Mid-Tower Chassis

- Two Built-in 200mm 5V ARGB Front Fans

- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm

- Built-in ARGB Switch Board for Different Lighting Modes

- Gaming Design, Mesh Front Panel

- Riser GPU Support Bracket

- Built-in Power Cover

- 4mm Tempered Glass Side Panel

- Superior Hardware Support

- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port

- I/O Port Supports Dual USB 3.0

Dual Built-in 200mm 5V ARGB Case Fans

Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.

One Click, Switching The Mode

The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.

- Wave Mode

- Flow Mode

- RGB Lighting

- Radar Mode

- Breath Mode

- Full Lighted Mode

- Single Colour

- Light Off

Long press on RGB button for 3 seconds, fans will blink twice which now are controlled by MB software, and vice versa.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites.

Angular, Mesh Front Panel

Expanded from the gaming spirit of the classic Commander MS-I chassis, the uniquely design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.

Riser GPU Support Bracket

Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.

Built-in PSU Cover

Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.

Seamless Tempered Glass Panel

The tempered glass side panel of the Commander C31 is built to be more durable and scratch resistant than older acrylic panels.

Superior Hardware Support

The Commander C31 has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.

Excellent Cooling Capability

Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.

Handy I/O Ports

Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.

Model Number

CA-1N2-00M6WN-00

Model

Commander C31 TG Snow ARGB

Form Factor

Mid Tower

Motherboard Support

ATX

Micro ATX

Mini-ITX

Side Panel

1 x 4mm Tempered Glass

Colour

Exterior & Interior: White

Material

SPCC

Drive Bays

Hidden: 3 x 3.5" or 2.5" (HDD Bracket) / 2 x 2.5" (HDD Bracket)

Expansion

Slots: 7 + 2

I/O Port

2 x USB 3.0

1 x HD Audio

1 x RGB Switch

PSU Support

Standard PS2 PSU (optional)

Cooling Included

Rear: 1 x 120 x 120 x 25 mm fan (1000RPM / 16 dBA)

Front: 2 x 200 x 200 x 30 mm ARGB fan (800RPM / 29.2 dBA)

Cooling Support

Front: 3 x 120mm / 2 x 140mm / 2 x 200mm

Top: 2 x 120mm / 2 x 140mm

Rear: 1 x 120mm

Radiator Support

Front: 1 x 360mm / 1 x 280mm

Top: 1 x 240mm / 1 x 280mm

Rear: 1 x 120mm

Dimension ( H x W x D )

462 x 233 x 507 mm

Net Weight

8.01 kg